Our BJS115 Adjustable Height and Width Pipe Jack Stand is the same as our BJS106 except the height can be adjusted from 29" to 40". Max capacity is 2500 pounds. Call 281-842-7777 if you want rubber (reduces capacity to 1000 lbs.) or Stainless Steel rollers instead of Steel.
Adjusting Nuts 1 ¼" Hex
Rollers are 4 " Dia. x ½" A 36 Steel Lathe Turned For Concentricity
Rollers Have Oilless Bronze Bushings
Roller Holders Are Made Of 11 Gauge Steel With 3/8" Basses
Adjusting Screw ¾" - 6 Pitch Full Acme Thread
Adjusting Screw Mounted In Oilless Bronze Bushings
Carriage Housing 2" x 3" 11 Gauge Tubing
Leg Pattern 23" x 26" For Working Stability
Legs Are Of "A" Frame Design
Center Braces From Middle Of Carriage To Lower Leg Brace For Even Distribution Of Load
All Legs Have 2" Dia. Foot Surface
Adjustment Of Rollers Will Accept ½" Dia. To 48" Dia. Work Piece
Roller Holders Have Drain Passages To Prevent Trapped Water When Used Outdoors
Carriage Housing Has Drain Holes To Allow Water To Drain Through Legs
Legs & Braces 1" Square Tube 16 Gauge
Rollers Are Painted With High Visibility Yellow Paint
All Stands Are Labeled With Working Capacity Of At Least 2 to 1 Safety Factor
Certified Testing By Independent Source
Working Load Capacity 2500 LBS
Complete Stand Weight 40 LBS
Note
Our shipping calculator is inaccurate. We will contact you with the correct amount and get your permission before charging your card. We apologize for any inconvenience. Call 281-842-7777 for a quote.
